Indus Industrial Group supplies heavy-duty Seamless Spigot HDPE Equal and Reducing Tees engineered across nominal diameters from DN63 to DN800 in pressure ratings SDR11 (PN16 water) and SDR17 (PN10 water) according to EN 12201-3 and ISO 4427-3 standards. Injection-molded as monolithic single-piece components or fabricated with sweeping radii, these long-spigot fittings preserve 100% of the pipe barrel working pressure (derating factor = 1.0). Engineered for municipal water mains, raw river water intake stations, and industrial manifolds across Iraq, they feature extended spigot ends suitable for both hydraulic butt welding and electrofusion jointing.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | EN 12201-3 / ISO 4427-3 / DIN 16963 / EN 1555-3 |
| Run Diameter Range | DN63 to DN800 (Host pipe outside diameter OD) |
| Branch Diameter Range | DN63 to DN800 (Equal or reduced branch takeoff sizes) |
| Pressure Classes | SDR11 (PN16 Water / PN10 Gas) / SDR17 (PN10 Water) |
| Manufacturing Process | Monolithic Injection Molded (DN63–DN315) / Swept Spigot Formed |
| Raw Material | Virgin PE100 Black Pre-Compounded Compound (MRS 10 MPa) |
| Derating Factor | 1.0 (Zero pressure down-rating required) |
| Spigot Type | Long Spigot for Butt Fusion and Electrofusion |
| Hydrostatic Strength | 100% batch tested per ISO 1167 (100h / 1000h test) |
| Hygiene Certification | WRAS / NSF 61 Drinking Water Approved |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | HDPE Butt Fusion Fittings |
Municipal water transmission main branches, water treatment plant manifold headers, river raw water booster pump headers, industrial cooling water circuits, and fire protection distribution headers across Baghdad, Erbil, Basra, Kirkuk, and Nineveh.
HDPE Butt Fusion Equal and Reducing Spigot Tees provide the core mechanical branching component for large-scale municipal water conveyance, river intake pumping manifolds, and industrial cooling loops across Iraq. Compliant with EN 12201-3, ISO 4427-3, and DIN 16963 standards, these fittings are manufactured from 100% virgin pre-compounded PE100 black resin. Unlike cheap fabricated mitred tees made from welded pipe pieces that must be down-rated by 40% per DVS 2205, Indus injection-molded spigot tees maintain full pressure integrity (derating factor = 1.0), guaranteeing continuous 16 Bar working performance under dynamic water hammer surges.
The hydraulic profile is optimized with sweeping internal transition radii that eliminate sharp corners, reduce turbulent eddies, and minimize pumping friction head losses. The extended cylindrical spigot lengths on all three branches provide ample clearance for clamping inside standard hydraulic butt welding machines or applying electrofusion couplers for confined trench tie-ins. The virgin PE100 compound provides total immunity to aggressive saline soils, gypsum-rich groundwater, and electrolytic attack across central and southern Iraq.
Staged in extensive inventory at our Erbil Heavy Plant Yard, Baghdad Central Logistics Depot, and Basra Port Hub, Indus supplies complete equal and reducing tee combinations with authentic EN 10204 3.1 inspection certification and hydrostatic pressure test logs.
Fabricated mitred tees have welded internal joints that create stress concentrations and restrict flow; international standards (DVS 2205) require down-rating their pressure by 30% to 50%. Indus molded spigot tees have homogeneous solid walls with 100% full pressure rating (16 Bar for SDR11) with zero risk of joint separation.
Yes. All branches feature extended long spigots designed specifically to provide full clamping length in butt fusion alignment frames and sufficient insertion depth for electrofusion couplers.
Indus maintains standard reducing tees (e.g., DN160×110, DN200×110, DN250×160, DN315×200, DN400×250) in stock at our Erbil, Baghdad, and Basra facilities for 24-hour dispatch.
