Indus Industrial Group manufactures and stocks continuous-length HDPE PE100 Potable Water Service Connection Coils engineered in outside diameters OD 20mm, 25mm, 32mm, 40mm, 50mm, and 63mm in pressure class PN16 (SDR 11) compliant with ISO 4427, EN 12201, and Iraqi General Directorates of Water (GDW) specifications. Supplied in 100-meter, 150-meter, and 200-meter continuous coils, these flexible black polyethylene coils with co-extruded blue identification stripes provide joint-free municipal service connections from the street water distribution main directly to residential, commercial, and industrial water meter boxes, eliminating underground leakage points.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Outside Diameter Range | OD 20mm, 25mm, 32mm, 40mm, 50mm, 63mm |
| Working Pressure Rating | PN16 (SDR 11) Standard / PN20 (SDR 9) Heavy Duty |
| Standard Coil Lengths | 100 meters, 150 meters, and 200 meters continuous coils |
| Raw Material Classification | PE100 High-Density Polyethylene (MRS 10.0 MPa) |
| Carbon Black Content | 2.0% to 2.5% finely dispersed furnace carbon black |
| Governing Standards | ISO 4427-2 / EN 12201-2 / DIN 8074 / DIN 8075 |
| Color & Striping | Solid Black with 4 co-extruded Blue Longitudinal Stripes |
| Minimum Bending Radius | 20 × Outside Diameter at 20°C (flexible trench laying) |
| Operating Temperature | -20°C to +40°C continuous (tested up to +60°C derated) |
| Certifications | WRAS Approved / NSF 61 / EN 10204 3.1 Factory Inspection |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | HDPE PE100 Pressure Pipes |
Municipal house service connections (HSC), water meter manifold connections, residential housing complexes, commercial district metering, and rural village branch feeds across Baghdad, Erbil, Basra, Najaf, and Karbala.
Continuous HDPE PE100 Service Connection Coils represent the standard engineering commodity for municipal drinking water distribution networks and house service connections (HSC) across Baghdad, Erbil, Sulaymaniyah, Basra, and Kirkuk. Governed by ISO 4427-2 and EN 12201-2 standards, these pipes are extruded exclusively from virgin pre-compounded high-density polyethylene resin (MRS 10.0 MPa) containing 2.0% to 2.5% finely dispersed carbon black for supreme ultraviolet protection against intense Iraqi solar radiation during outdoor storage.
The continuous coil design allows utility contractors to lay pipe trenches up to 200 meters without a single intermediate electrofusion or mechanical joint. This dramatic reduction in underground jointing points directly resolves the primary cause of municipal non-revenue water (NRW) losses in Iraqi cities, where high soil salinity and vehicular vibration frequently stress rigid fittings. The flexible pipe naturally absorbs ground settlement, traffic dynamic loads, and seasonal thermal expansion without cracking or joint displacement.
Certified fully non-toxic and neutral to water taste and odor according to WRAS and NSF/ANSI 61 international drinking water health standards, Indus service coils operate continuously at 16 Bar working pressure with a 50-year design life. Indus maintains massive rolling stocks of 100m and 200m coils packaged on heavy steel-banded pallets in our Erbil, Baghdad, and Basra distribution hubs, ready for immediate dispatch to municipal water meter connection contractors.
Continuous 200m coils allow contractors to run service pipe directly from the main tapping saddle to the property meter boundary without any underground joints, eliminating leak risks and drastically speeding up civil installation in tight urban streets.
Yes. Manufactured strictly to ISO 4427 outer diameter and wall thickness tolerances, our coils connect seamlessly to standard polypropylene compression fittings, brass ferrules, and electrofusion tapping saddles.
Yes. The pipes are compounded with 2.5% carbon black meeting ISO 4427 thermal stability requirements, allowing outdoor storage up to 2 years under direct sunlight without polymer degradation.
