Indus Industrial Group supplies heavy-duty Horizontal End-Suction Single-Stage Centrifugal Water Pumps engineered across discharge diameters from DN32 to DN300 with electric motor drives from 1.1 kW to 200 kW (400V 50Hz, IE3 premium efficiency) according to ISO 2858, ISO 5199, and EN 733 standards. Featuring a back pull-out design that allows complete rotor, bearing, and seal maintenance without disconnecting the suction or discharge pipework from the foundation, these pumps are built for municipal water supply, raw river water boosting, cooling loops, and industrial circulation across Iraq. Available with enclosed bronze, stainless steel, or ductile iron impellers and cartridge mechanical seals.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | ISO 2858 / EN 733 (DIN 24255) / ISO 5199 / ISO 9906 |
| Suction & Discharge Range | Suction DN50–DN350 / Discharge DN32–DN300 (Flanged EN 1092-2) |
| Flow Rate Range | 5 m³/h to 1,800 m³/h (Head: 10m to 140m) |
| Motor Power Ratings | 1.1 kW to 200 kW (IE3 Premium Efficiency, 400V 50Hz) |
| Motor Enclosure & Insulation | IP55 / IP65 / Class F / Class H (Rated for +50°C ambient) |
| Casing Construction | Cast Iron EN-GJL-250 / Ductile Iron EN-GJS-500-7 |
| Impeller Material | Cast Bronze CuSn10 / Stainless Steel AISI 304/316 / Ductile Iron |
| Shaft & Sealing | Stainless Steel AISI 420/316 with SiC/Carbon Mechanical Seal |
| Working Pressure Rating | PN16 (Standard) / PN25 (High-Pressure Option) |
| Baseplate Mounting | Rigid Structural Fabricated Channel Steel with Coupling Guard |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | End-Suction Water Pumps |
Municipal water treatment plant booster headers, raw water river intake pump stations, industrial cooling tower circulation loops, district irrigation pumping mains, and commercial HVAC chilled water distribution across Baghdad, Erbil, Basra, Mosul, and Karbala.
Horizontal End-Suction Centrifugal Water Pumps conforming to ISO 2858 and EN 733 represent the foundational mechanical pumping workhorse for municipal water treatment facilities, regional booster stations, industrial cooling circuits, and district irrigation schemes across Iraq. Engineered strictly to ISO 5199 heavy-duty process pump standards, the volute casing is cast from high-density cast iron (EN-GJL-250) or spheroidal graphite ductile iron (EN-GJS-500-7) with heavy wall thicknesses that resist hydraulic pressure spikes and piping nozzle loads. The hydraulic profile is optimized through CFD fluid modeling to achieve hydraulic efficiencies exceeding 80% to 85%, dramatically lowering energy bills for municipal utilities in Baghdad, Erbil, and Basra.
The back pull-out construction provides the greatest operational advantage for plant maintenance engineers: the entire rotating element (bearing bracket, shaft, mechanical seal, and impeller) can be dismantled and serviced from the rear without disconnecting the pump casing from the suction/discharge pipeline or disturbing motor alignment when used with spacer couplings. The shaft is supported by heavy-duty grease- or oil-lubricated angular contact ball bearings engineered for an L10 bearing life exceeding 40,000 hours under continuous industrial duty.
Equipped with premium-efficiency IE3 electric motors (Class F insulation, IP55/IP65 enclosure) rated for 50°C continuous ambient duty, these pumps operate reliably through severe Iraqi summer heat waves without thermal derating. Staged at the Erbil Heavy Plant Yard, Baghdad Central Depot, and Basra Port Corridor, Indus supplies bare-shaft pumps, complete skid packages with flexible spacer couplings and heavy channel steel baseplates, and certified EN 10204 3.1 material and hydrostatic test reports.
In a back pull-out pump, the casing remains permanently bolted to the pipeline flanges. By removing the spacer coupling and rear casing cover, technicians can extract the entire rotating assembly (impeller, shaft, mechanical seal, and bearings) onto a workbench in minutes without unbolting pipes or moving the heavy electric motor.
Yes. Indus equips all pump skids with oversized IE3 premium-efficiency electric motors featuring Class H insulation and heavy-duty cooling fans rated for continuous operation at +50°C to +55°C ambient temperatures without thermal tripping.
Yes. Indus maintains comprehensive spare parts inventory including bronze and stainless steel impellers, ground stainless steel shafts, cartridge mechanical seals, and bearing brackets at our Erbil, Baghdad, and Basra logistics hubs for immediate dispatch.
