Indus Industrial Group supplies heavy-duty Industrial Refinery and Oilfield High-Pressure Fire Hydrant Monitor Stations engineered across nominal inlet diameters from DN100 to DN200 in pressure classes PN16 and PN25 according to NFPA 20, NFPA 24, and UL/FM standards. Designed specifically for crude oil storage tank farms, petrochemical refineries, gas degassing stations, and power generation plants across Iraq, these heavy-duty stations combine a heavy ductile iron or carbon steel pillar hydrant with an integrated 360-degree rotating water/foam monitor cannon delivering discharge rates from 2,000 to 7,500 liters per minute over distances exceeding 65 to 80 meters.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | NFPA 20 / NFPA 24 / UL Listed / FM Approved / EN 14384 |
| Inlet Connection Sizes | DN100 (4"), DN150 (6"), DN200 (8") Flanged to EN 1092-2 PN16/25 |
| Flow Rate Capacity | 2,000 L/min to 7,500 L/min (500 GPM to 2,000 GPM) |
| Discharge Range | 65 meters to 85 meters horizontal stream reach at 10 Bar |
| Monitor Material | Stainless Steel AISI 316 / Marine Bronze / Heavy Cast Carbon Steel |
| Riser Manifold | Ductile Iron EN-GJS-500-7 / Seamless Steel Pipe ASTM A106 Gr. B |
| Auxiliary Outlets | 2 to 4 × 2.5" Valved Hose Outlets with BS 336 / Storz Couplings |
| Monitor Travel | 360° Continuous Horizontal / +85° to -45° Vertical Elevation |
| Corrosion Protection | Three-Coat Offshore Marine Epoxy & UV Polyurethane (≥300 µm) |
| Operating Pressure | 16 Bar to 25 Bar continuous industrial fire main rating |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | Municipal Fire Hydrants |
Crude oil storage tank farms, oil refinery process units, gas processing and degassing stations, petrochemical complexes, and power plant fuel storage areas across Basra, Kirkuk, Baiji, Erbil, and Maysan.
Industrial Refinery and Oilfield High-Pressure Fire Hydrant Monitor Stations represent the frontline firefighting defense equipment for high-hazard petrochemical facilities, crude oil export terminals, and gas processing plants across Iraq. In critical energy infrastructure in Basra (Rumaila, West Qurna, Zubair), Kirkuk, Baiji, and Erbil, hydrocarbon fires generate immense thermal radiation that prevents firefighters from approaching with standard hand-held hoses. Indus hydrant monitor packages provide fixed, high-volume fire suppression cannons capable of projecting massive streams of water or fire-fighting foam directly onto burning storage tanks and processing manifolds from safe standoff distances.
The assembly comprises a heavy-duty flanged ductile iron (EN-GJS-500-7) or ASTM A106 carbon steel riser manifold equipped with multiple 2.5-inch auxiliary valved hose outlets and a top-mounted high-flow manual gear-operated or lever-operated monitor cannon. Fabricated from corrosion-proof stainless steel (AISI 316) or marine bronze, the monitor features 360-degree continuous horizontal rotation and +85° to -45° vertical elevation travel with positive handwheel locking locks. The adjustable master stream nozzle can be shifted from straight stream (for maximum reach up to 80 meters) to wide fog pattern (for thermal radiation shielding).
Engineered to operate with fresh water, raw river water, or high-salinity seawater, the station is protected with marine-grade offshore epoxy coating (min 300 µm) and fire-retardant safety red polyurethane topcoat. Staged at our Erbil Heavy Yard, Baghdad Central Depot, and Basra Port Hub, Indus supplies monitor stations with companion foam inductors, isolating valves, and full EN 10204 3.1 inspection certification.
Yes. Indus monitor stations are equipped with self-inducting master stream foam nozzles complete with pickup tubes and metering valves (1% to 6% foam concentration), allowing rapid transition from water cooling to AFFF foam blanket application on oil fires.
The monitor waterway and swivels are fabricated from marine bronze or 316 stainless steel with fully enclosed stainless steel ball bearings. The exterior is coated with a 300-micron marine offshore epoxy system tested for 3,000 hours of salt spray resistance (ASTM B117).
Indus supplies complete compliance packages including NFPA performance datasheets, hydrostatic shell test certificates (1.5x PN), factory flow-versus-pressure calibration curves, and EN 10204 3.1 material test certificates.
