Indus Industrial Group supplies heavy-duty Motorized Electric Actuator Double Flanged Butterfly Valves engineered across large nominal diameters from DN150 to DN2000 in pressure classes PN10, PN16, and PN25 according to EN 593, EN 1074-2, and ISO 5211 standards. Coupled with smart electric actuators (Auma, Rotork, or Indus series) operating on 400V 3-phase 50Hz electrical supply with IP68 waterproof enclosures, these automated valves provide quarter-turn flow isolation and precision modulating throttling (4–20mA). Engineered for SCADA-controlled pumping stations, water treatment plant filter manifolds, and reservoir outlet works across Iraq.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Governing Standards | EN 593 / EN 1074-2 / ISO 5211 / IEC 60034 / EN 60529 |
| Nominal Diameter Range | DN150 to DN2000 (Metric Flanged to EN 1092-2) |
| Pressure Ratings | PN10, PN16, PN25 (Bar) |
| Motor Power Supply | 400V AC ±10%, 3-Phase, 50 Hz (220V 1-Phase available) |
| Enclosure Protection | IP68 Submersible (15m water depth for 72 hours) |
| Duty Classification | Class A/B (On-Off Isolation) & Class C (Modulating Throttling) |
| Control Inputs/Outputs | 4–20 mA, Open/Stop/Close dry contacts, Modbus RTU, Profibus |
| Body & Disc Material | Ductile Iron EN-GJS-500-7 with Fusion-Bonded Epoxy (≥250 µm) |
| Manual Override | Declutchable Handwheel with Safety Interlock |
| Stroke Operating Time | Configurable 15 to 120 seconds (Anti-surge closing) |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | Flanged Butterfly Valves |
SCADA-controlled water treatment plant filter galleries, municipal booster station discharge manifolds, automated reservoir level control, cooling water circulation control, and major water transmission balancing across Baghdad, Erbil, Basra, Wasit, and Nineveh.
Motorized Electric Actuator Flanged Butterfly Valves represent the premier automated flow control and isolation technology for municipal water treatment complexes, booster pumping stations, and regional water supply grids across Iraq. In large water treatment facilities such as the Karkh Water Treatment Plant in Baghdad, the Greater Erbil Water Project, and the Basra Grand Water Scheme, opening and closing massive DN600 to DN2000 valves by hand is physically impossible during continuous operational cycles. Indus motorized butterfly valves allow central SCADA automation systems to command valve positions with pinpoint accuracy, regulating reservoir filling levels, balancing pipeline flow splits, and isolating lines during pump trips.
The mechanical valve is engineered in double eccentric or concentric flanged geometry cast from high-tensile ductile iron (EN-GJS-500-7) with continuous stainless steel seats and high-elasticity EPDM seals delivering bi-directional drop-tight shutoff (Rate A per ISO 5208). The electric actuator features an integrated quarter-turn planetary gearbox, electronic torque protection, non-intrusive infrared setup display, and multi-protocol digital communication cards (Modbus RTU, Profibus-DP, Ethernet). Certified IP68 (submersible up to 15m for 72 hours), the actuator operates without failure in flooded valve vaults.
Equipped with a declutchable manual handwheel for emergency operation during power blackouts, the actuator features anti-water hammer programmable closing curves. Staged at our Erbil Heavy Plant Yard, Baghdad Central Logistics Depot, and Basra Port Hub, Indus supplies complete motorized butterfly valve assemblies with pre-commissioned actuators, wiring schematics, and full EN 10204 3.1 inspection certification.
Yes. When fitted with a Class C modulating actuator, the valve accepts continuous 4–20mA analog control signals, positioning the disc accurately between 0° and 90° to regulate water flow and pressure with high repeatability.
The actuator housing is double-sealed with redundant O-rings and hermetically separated terminal compartments. It is certified for continuous submersion up to 15 meters water depth for 72 hours, preventing water damage if roadside chambers flood during seasonal rains.
Yes. Indus operates valve automation workshops in Erbil, Baghdad, and Basra where actuators, mounting brackets, and driveshafts are precision-aligned, calibrated, and bench-tested prior to site delivery.
