Indus Industrial Group supplies industrial-grade Borehole Multi-Stage Submersible Deep-Well Pumps engineered for 6-inch, 8-inch, 10-inch, and 12-inch drilled well casings, delivering discharge heads up to 450 meters and flow rates up to 600 m³/h. Manufactured with 100% precision-stamped or cast AISI 304 / AISI 316 stainless steel impellers, diffusers, and pump bowls, paired with water-filled rewound canned submersible motors (NEMA standard), these deep-well pumps deliver high hydraulic efficiency and corrosion resistance in aggressive groundwater aquifers across the Iraqi Western Desert and Kurdistan highlands.
| Pricing Verification | Commercial Quote on Demand (RFQ) |
| Well Casing Diameters | 6-inch (150mm), 8-inch (200mm), 10-inch (250mm), 12-inch (300mm) |
| Flow Rate Range | 10 m³/h to 600 m³/h (high capacity continuous duty) |
| Head Capacity | Up to 450 meters Total Dynamic Head (TDH) |
| Motor Power Range | 5.5 kW to 220 kW (400V 50Hz 3-Phase Submersible Motor) |
| Pump & Motor Materials | AISI 304 / AISI 316 Deep-Draw Stainless Steel |
| Sand Content Tolerance | Up to 50 g/m³ continuous (abrasion-proof bearings) |
| Discharge Outlets | DN65 to DN200 (2.5" to 8") BSP / NPT Threaded or Flanged |
| Motor Insulation Class | Class F / Class H (suitable for water up to +40°C) |
| Protection Class | IP68 Submersible (continuous downhole submersion) |
| Governing Standard | ISO 9906:2012 Grade 2B / NEMA MG 1-1998 |
| Sector & Division | Water & Wastewater (Div 01) |
| Parent Category | End-Suction Water Pumps |
Municipal drinking water wellfields, agricultural deep well irrigation, remote desert military camps, oilfield water supply, and industrial bottled water plants in Anbar, Najaf, Erbil, Sulaymaniyah, and Kirkuk.
Deep groundwater extraction in Iraq's arid and mountainous regions—including Anbar, Najaf Desert, Sinjar, Sulaymaniyah, and Erbil plains—requires deep-well submersible pumps engineered to endure high hydrostatic pressures and corrosive, sulfurous groundwater. Indus Borehole Submersible Pumps conform strictly to ISO 9906 Grade 2B and NEMA mounting dimensions, offering all-stainless-steel hydraulic wet ends that eliminate rust, shaft seizing, and galvanic degradation.
The multi-stage pump incorporates floating or fixed stainless steel impellers equipped with heavy-duty tungsten carbide / ceramic intermediate bearings that tolerate suspended sand particles up to 50 g/m³. A built-in stainless steel non-return check valve prevents damaging water hammer and reverse rotation during pump shutdown. The submersible electric motor is water-filled, featuring high-temperature insulated copper windings capable of continuous submerged operation in groundwater temperatures up to +40°C.
Delivered ready for downhole installation with companion submersible drop cables, stainless steel wellhead clamps, pressure gauges, and control panels featuring electronic dry-run protection and phase-failure monitoring. Indus maintains extensive borehole stock and certified testing benches at our Erbil and Baghdad facilities.
Stainless steel AISI 304/316 completely resists corrosion from acidic or saline groundwater, weighs 40% less for easier crane installation downhole, and maintains smooth hydraulic surfaces that save up to 15% electrical power.
Our pumps are fitted with ceramic-tungsten carbide shaft bearings and floating impellers rated to handle up to 50 grams of sand per cubic meter of water without premature impeller wear.
Yes. All our submersible motors are fully compatible with 400V 50Hz diesel generators, and we provide soft starters or VFD control panels to prevent generator stalling during startup.
